Multi layers aluminum foil insulations for roofing, wall and floor

Aluminum Bubble Foil Heat Reflective Insulation Sheets for roof floor an dwall

Product Introduction:

The product consists of three layers of aluminum foil with plastic bubble laminated between the aluminum foil,provides excellent insulation: Reflects up to 97% of radiant energy in addition to resisting other types of heat transfer from conduction, convection and radiation. The two side aluminum foil forms an effective barrier against moisture, air currents and vapors.
It is an economical solution for a wide range of industrial, manufacturing and consumer applications.

Data Sheet:

Installation methods and Installation Projects:

• Measure the metal roof to determine the amount of bubble foil wrap insulation required for the project. Purchase approximately 10 to 15 percent more product than required to account for overlapping and to provide the proper air gap between the purlins -- the horizontal lengths of wood that support the roof panels between the rafters.
• Cover the metal roof purlins with double-sided adhesive tape. Unroll the foil wrap insulation and attach it to the first purlin. Continue to unroll the foil insulation and attach it the remaining purlins, paying attention to allow the insulation to sag at least 1 inch between the horizontal members. The sagging provides an air gap that raises the insulation’s efficiency.
• Continue to attach the Aluminum foil bubble insulation to the metal roofing purloins, overlapping the adjoining sheets 2 inches as you go. This is a temporary hold to keep the bubble foil wrap in place while you prepare the next step.
• Secure the bubble foil to the framing members with furring strips. Attach the furring strips perpendicular to the purloins every 24 inches to the framing members with 2-inch metal screws, paying attention to not disrupt the insulation’s sagging. Use a drill equipped with a screwdriver bit to drive the screws into the framing members.
• Cover the seams of the bubble insulation with foil tape.

Application:

Roof,Ceiling,Wall,Floor,Attic,Livestock Shelters,Basement,Factory buildings,Duct wrappings,Container liner,Sun-stop cover and vehicles.
1. Thermal insulation and light inflecting in the constrction and protection for both cold winter and water piper
2. Separation of refrigerator,warm keeping for center air-conditioned,refrigerator and other home appliances
3. Thermal insulation,sound absorption and noise reduction for car ,train, refrigerator car and laboratory, moisture proof cushion for traveling.

Building insulation material for construction is a brand new heat insulation product manufactured of polyethylene bubble/foam sheet faced with aluminium foil on the one or two sides. It can reflect 97% radiant heat and reduces energy costs used in winter heating and summer cooling. Reflective Foil thermal insulation is only a few millimeters thick, its two sides of aluminium foil reflects more than 97% thermal energy that reaches it .In summer, almost all the sunlight and heat is bounced back into the air, Keeping the heat out of the air conditioned building. In winter, Almost all the heat generated inside the building is retained. Also, The bubble/foam sheet in between the aluminium foil offer thousands of empety air cells, which makes the heat more difficult to pass through.1) Thickness: 0.017-0.0TapeMMM
2) Width: 300MM 450MM 500MM
3) Length: as your request
4) Color: transparent/clear,black,green,and so on
5) Net weight: on buyer's option
6) Packing: cartons or pallets.
Product features:
1.100% New material and accept sample order.
2.Excellence and beautiful, the high grade product.
3.Easy to be pulled out and cut.
4. Transparency and no drape and even thickness.
5. Easy to use, can be recycled.

PVA water soluble film
Specifications
Plastic Film

100% new raw material, LDPE , UV resistance

Thickness: 12 mic --50mic --300 mic .

Colour: Transparent, Black, Red, Blue, Green, etc.

The main products of the company are polyvinyl alcohol (PVA) materials, films and bags etc. We have manufactured a series of products of water-soluble PVA bags for various uses.It could be processed according to customers demand of any size and specification.the water-soluble PVA bags are divided into the inner packing bags and the outer packing bags. Their characteristics are as follows:

1,It will dissolve competely under the normal water temperature(20±5℃) after 5-18 sec.

2,Its final products are CO2 and h3O, non-toxic and non-pollution;

3,The inner packing bags can dissolve completely above 3 ℃, while the outer packing bags can issolve completely above 80 ℃.

4,Printing can be done on both the inner packing bags and the outer packing bags, with clear handwriting, and oil ink and bags will dissolve together.

5 The water-soluble bag has no static electricity, h3 stretching intensity and even tensity .

6,The inner packing bags has heat sealing or tying with the water-soluble rope, while the outer packing bags can have nylon string and self-adhesive foil.

7,The size of water-soluble packing bags can range freely between 4cm*4cm---120cm*120cm.

8,Can be weighted exactly, no waste.
 

Packaging Details :
Bags or film rolling on the 3" paper core ,With film bag covered on outside .
each sides of core with plastic cap
All rolls loading on plastic pallet (1300*1100*150mm)
For container loading ,suggest use gusseted fold type
20ft: 8pallets/8-10tons
40ft: 16pallets/16-23tons

Delivery Time:
FCL container or LCL container,by sea or by air
20 days after receiving the deposit payment

POF package shrink film application:

The POF shrink films are used for labeling and packing products in various industries:
-Food & beverage industries: Mineral Water, Soft Drinks, Liquors, Pickles, Jams, Jellies, Fruit Juices, Tea, Coffee,Spices, Ghee, Edible Oils etc. in Bottles / Cans / Jars
-Printing & Packaging industries
-Cosmetic & Toiletry industries: Powder, Perfume, Hair Oil, Shampoo etc. in bottles & jars
-Pharmaceutical industries: Liquid Bottles, Tablet/Powder, Containers & Jars
-Electrical industries: for bus bar application and insulation tape packing
-Stationery & Writing instrument industries

POF film Packing details:
one roll of pof heat shrink film in one carton box; tens of cartons in a pallet;
10~12 pallets pack into 1*20 ft. container;
20~22 pallets load into 1*40 ft. container

Characteristics:PE shrink film is made from high-pressure polythene mixed with relevant auxiliary materials through huffing once, so it features tenacity, softness, impact-resistance and unbreakable.

1) Waterproof, Oil-proof, Moisture-proof, Anti-corrosion; Tear-resistance,
Dust resistance.
2) one-six colors printing can be added as per client specs.
3) Product types: single layer, tubing, bags, centerfold rolls.

Product Name: Polyolefin POF Heat Shrink Wrap Film
Material: PP + PE
Shrinkage ratio: over 60%
Thickness: 12.5micron (50gauge), 15micron (60gauge), 19micron (75gauga), 25micron (100gauge)
Roll width: 200mm (8") to 1600mm (80")
Roll length: 800m to 1600m for center-folded, 1600m to 3200m for single wound
for standard sizes, please refer to the SPECIFICATIONS below
Type: single wound, corner folded (also called center-folded,), tube

1. High transparency, fine luster

2. High shrinkage, up to75%

3. High heat sealing and intensity, suitable for manual, half antomatic and

high-speed antomatic packaging

4. High cold resistance, keep flexible below-50 degree celsius, adapt to

storage and transport in cold weather.

5. Environment-friendly, nontoxic and meets US. FDA standard

6. Prevent damp and dust

7. Low package cost, better than paper box and other materials

1. Food, beverage, household articles packing

2. Drug, health-care products outside or combinative packaging

3. Plastic & hardware package

4. Stationery, toys & books packaging

5. Electronic element, audio and video products packing

High quality POF shrink film

Enterprise Advantage :

Professional high-tech manufacturer

One stop service for machinery and its relative products

POF Heat-Shrinkable Film Features :

> Environment protection ,harmless and nonpoisonous

> Tight sealing and perfect welding performance

> High shrinkage ratio, which reaches by 70%

> Airproof packaging, dust and moister resistance

> Light weight and excellence in flexibility and tensile strength, even thickness

> High transparency and luster

> High impact resistance and excellence in low temperature, aging resistance.

> Excellent thermal sealing and easy wrapping

Available sizes

Machine Included in the Production Line :

1. 5-Layer Co-Extrusion Polyolefin Heat-Shrinkable Film Blowing Machine

2. Film Slitting Machine

3. Bag Making Machine

4. Recycling Machine

Product Feature From This Line :

1. Thickness : 12-30 micron( 0.012-0.030mm)

2. Max. Width : 1600 mm

3. Application: Widely applicable for the outer packaging of various products such as food, drink, frozen food, pharmaceuticals, commodities, toys, stationery, audio-visual product, cosmetics etc.

Features

Clear Builder's Film Multipurpose Film suitable for Temporary Weather protection during building, Plastic Tarpaulin, Moisture barrier, Drop Sheet,plant protection from birds or frost

• Handy Roll Size
• Moisture barrier under concrete slabs
• Plastic Tarpaulin
• Drop Sheet

1. Technical Data

2.Protective Film Features

Carpet Cover is the best temporary carpet protection you can buy. It is a clear, self-adhering protective film for all types of carpeting.
Carpet Cover non-slip surface ,it is a special blend of polyethylene which is highly resistant to tears or punctures.
Ideal choice during remodeling, painting and moving, it minimizes clean-up time and damage claims. Available in a variety of sizes, the larger rolls are reverse-wound for faster application.

Plastic sheet builders film black color 2mx100m

Product Description

For everything from simple dust protection to heavy-duty,construction projects.BAGEASE has a fitting solution.Their strong,durable plastics sheet comes in a variety of sizes ,thicknesses,and colors to meet the requirements of your project.This heavy-duty plastic sheet is ideal for several different kinds of protection.Use it as a moisture barrier around insulation for cement curing for heavy dust and debris protection ,or even as a cover for tools and equipment,use as much or as little as you need.

>strong and durable plastic sheet for multiple heavy-duty uses.

>ideal for construction sites and painting projects as a spray shield or drop cloth.

>Use as a Vapor barrier between drywall and insulation under concrete under slabs.

>Great for concrete curing or covering equipment during projects.

>Heavy-duty plastic sheet works well for weather protection.

>Made in China.

Brand Name: BAGEASE

Black Plastic sheet

Popular Size: 12ftx100ft/10ftx100ft/20ftx100ft/24ftx100ft 4mil/6mil/8mil/10mil

2mx50m/2mx100m/TapeMMx100m 75um/100um/135um/150um/200um

4mx50m/4mx100m/6mx100m 75um/100um/135um/150um/200um

We are professional manufacturer of HDPE ,LDPE AND LLDPE construction geomembrane , they are widely used for kinds of construction project, such as channel, garbage dump, swimming pool, dam lining,farm dams, fish pool, etc.

Color : black, white , black/white

Material : HDPE, LDPE, LLDPE OR MIX.

.Waterproof ,non-toxic, anti-acid, anti-aging, resistant corrosion, pulling, etc.

. available size:

max.18m(59feet) width if the thickness is less than 0.15mm(150mic).

max.12m(39feet) width if the thickness is less than 0.5mm(500mic.)

max. 8m (26feet )with if the thickness reach to 2mm

Besides,we also supply geo composite membrane, it's used for anti-seepage and seperation on River embankment, lake dam, tailing dam, sewage dam, reserviors.

Category:
one layer of geotextile with one layer geomembrane (geotextile is to protect geomembrane )
two layers of geotextile with one layer geomembrane (geomembrane is in the middle )
Size :Width:2-6m, Mass per unit: 300-2500g/m2

We are a professional manufacturer specialized in the production of wide range of plastic sheets and films for agriculture (both indoor and outdoor, for reflective & protective cover materials or mulching sheets), industry, construction (under concrete slab as a dampproof barrier, water/dust/paint Barrier, construction builder protection and more), packaging and so on.

We are committed to providing customers with high valued products and quicker factory action/service.

Our main products include:

1. Normal Clear / Black / Blue or other color poly plastic films / sheets

2. Black and White (Panda) Poly Film

3. White and/or Black Plastic Poly Grow Bags

4. Mirror-like Silver Aluminum Foil Coated Mylar Film

5. Light Reflective Aluminum Metalized Diamond Diffusion Film

6. Mylar Oxford Fabric (Blackout Canvas) for Grow Tent/ Tent / Box / Room

7. Aluminum Foil Air Bubble Laminated Film/Sheet

8. Multi-functional Strong Greenhouse Plastic Cover Film

9. Clear/White/Silver/Black Agricultural Ground Cover/Mulching Film

10. Aluminum Metallized CPP/PE/PET/BOPP Laminated Film (Silver Color or Customized Colors )

11. Highly reflective Mylar foil and PE Laminated Film/Sheet

"Innovation, meeting market demand and customer satisfaction" are our persistent pursuit.

We have well-equipped production site and expertise to mass produce and R&D products according to the needs of customers and the ever-changing market demand. If you are looking for products that is not included in the list, we are happy to develop or source for you so as to save your time, energy and freight cost.

WE ARE HERE TO SERVE YOU!

100% recycled pe construction builder film 200um black and clear

Geomembrane Liners are impermeable membranes used widely as containment liners, pond liners, landfill liners and more.

Made in a wide range of sizes from a wide range of material options, these liners are the perfect way to prevent liquids from causing contamination in your location.

Our geomembranes are used for environmental containment applications in the energy (oil and gas), mining, water, agriculture, food, construction and industrial sectors.

In many of these applications, liners are employed with geotextile or mesh underneath the liner to reinforce and protect the more flexible geomembrane.

Specification:

Thickness: 10-1000micron

Wide: 0.1m-16m

Color: black or transparent

100%Waterproof

Application:

1.Used in PONDS LINER (artificial lakes, garden,ponds, the lining of tank in golf course,slope protection, etc)

2.Used in dam (such as impervious, stop water loss, and reinforcing of lakes, and the impervious, slope protection, etc.)

3.Used in Environmental protection, energy/mining
(such as landfill, waste water treatment, toxic and harmful chemicals disposal sites, storage of dangerous goods, industrial waste, construction and demolition waste, etc.)

4.Used in Municipal projects and railway construction(underground subway, engineering underground and reservoirs on the roof, and the park on the roof, the lining in the sewage pipes, etc)

5. Used in Artifical lake

Hi, it is the pleasure to introduce ourselves to you as a corporation dealing exclusively in different kinds of plastic packaging bag and film as well as compression engine. If you want to know more detials,be available to contact me. the sample would be sent for you refering to . we are warmly welcome you to visit our factory. We are Pouch to enter into bussiness relations with you. The products are highly quality and reasonable. they are

selt throughout the world and we enjoy a great reputation from customers

China manufacture high quality pvc heat shrink packaging film

Shrink Film:

Material: PVC, PP/PE, POF

Suitable for packaging,cosmetics,etc.

Various sizes and specification

Characteristic:

1.Material: PVC, PP/PE, POF

2.Composite Layers: 1-5 layers

3.Conventional Thickness:0.012-0.08 mm (also can make other sizes according to your requirements)

4.Conventional Width:1-1170 mm (also can make other sizes according to your requirements)

5.Properties: with good leakproof and heat sealing performance, high compactness

6.Certification:ISO9001-2000, QS, FDA

Features:

1) Available in neutral or other various colours

2) Thickness: from 30Mic to 80Mic

3) Max Width is 3600mm

4) TD shrinkage: 50-65%,Max MD shrinkage: 5%

6) You can customize these films for automatic detection scanning requirements and increasing product shelf life.

Any questions, please feel free to ask!

Looking forward to our coming cooperate.

Packaging Details: 50-100 pcs in a bundle, 20 bundle in a poly bag, corrugated carton

What is POF shrink film?

POF shrink film is the abbreviation of bi-directional stretching polyolefin film. It is the most widely used and rapidly developing new type of environmental protection shrink film in the world. The product adopts advanced bi-directional stretching five layer melting and co-extrusion special technology. Soft shrink film with high transparency, high shrinkage, high toughness, high heat sealing performance, antistatic, cold resistance, safely and reliability is produced.

Features:

* Suitable for both regular and irregular products

* No hard ears when working with machine

* Good performance under low temperature

* 5 layer technique ensures high quality

* Environmental friendly

* For high speed automatic shrink machine

Bagease Advantage:

* Low cost packing material option

* Light in weight but strong protection

* Ultra-thin from 10um

* Beautiful looking

* Environmental friendly

Application:

Boxes, Cups, Stationery, Books, Magazines, Toys, Cosmetic etc.